Draco 85
75 hp super low professional tractor with differentiated wheels. The most agile of the category thanks to the Dualsteer® double steering system.
Draco 85 Dualsteer® is a low and compact tractor to easily work in greenhouses, olive groves, orchards and vineyards also on slopes, pergola vineyards and canopy plantations or characterised by low foliage.
The unrivalled manoeuvrability makes it unique among those specialising in processes with little space for manoeuvres at the turn space.
The new design, with a compact bonnet and 8 cm lower, ensures high visibility.
The new, low profile, pressurised and Category 4 approved “Compact Pro” cab (optional) ensures full operator protection.
SDT | Dualsteer®
The oversized rear wheels, available in 20 or 24”, ensure high lifting capacity (2700 kg) and traction on any type of ground.
The OS-Frame and steering acting both on the central joint and on the front wheels, ensure a 60° steering angle, essential for manoeuvring in narrow spaces and for exiting and entering the next row with a single manoeuvre.
The Draco 85 range is also available in the RS version.
Technical Data
Draco 85 - DUALSTEER®
| Type | Differentiated wheels and short wheelbase with driving position with platform suspended on silent block |
|---|---|
| Chassis | Articulated and steering wheels |
| Driving position | Monodirectional |
| Transmission | 16 + 16 with Easy Plus™ clutch and Smart Brake & Go |
| Synchronized reverser | Yes with Power Clutch System button |
| Electro-hydraulic power shuttle EasyDrive® | Optional |
| Drive | 4WD with front-wheel drive disengagement |
| Hydraulic system | Dual circuit with independent pumps |
| Heat exchanger | Yes |
| Joystick | Optional. Proportional electronic control of lifts and control valves, potentiometer for adjusting the hydraulic flow rate and remote control for PTO engagement |
| Rear lifting capacity (kg) | 2700 (at the ball joint) |
| Front lift | Optional |
| PTO rotation speed (rpm) | 540 / 540E (optional: 540 / 1000) |
| PTO engagement control | Electro-hydraulic |
| Service brakes | Multi disc in oil bath with hydrostatic control, acting on four wheels. Independent manoeuvring brakes acting on rear wheels |
| Cabin | Optional: 'Compact Pro' low-profile, pressurised and homologated cat. 4, with heating and air-conditioning system |
Tyres: 420/65 R24 – 320/70 R24
Engine speed: 2300 rpm
TOP of the range contents.
Unique agility!
Dualsteer® steering system
Dualsteer®
Unique on the market, the Dualsteer® is a dual steering system that joins the central joint of the frame to the front wheels.
Dualsteer® simultaneously highlights the manoeuvrability qualities of articulated tractors with the safety and stability typical of the steering wheel versions.
Clean power.
The Draco 85 range is equipped with 75 hp 4-cylinder Turbo Intercooler engine with particulate filter, that BCS Group worked on in collaboration with Kohler, their technological partner, for an advanced regeneration strategy guaranteeing maximum performance and reducing machine downtime to a minimum.
The rpm are electronically controlled quickly and precisely through a console positioned to the right of the steering wheel with functions of:
- speed up/down,
- set speed storage/recall,
- switching off the electronic accelerator and switching to minimum speed.
Renewed transmission.
Easy Plus™ clutch
Always smooth and progressive engagements.
The multidisc clutch in oil bath with hydraulic control is controlled by a new software that filters any poor use of the clutch pedal by the operator, avoiding jerky start-up.
Thanks to the Easy Plus™ clutch, progressive engagement is guaranteed, without jerky movements and wear.
Power Clutch System
Quick shifting for maximum operational comfort.
Using the button located on the reverser lever and gears, the operator can change the direction of the tractor or change speed without using the clutch pedal, for maximum operating comfort.
Smart Brake & Go
Assisted stop and restart control.
The system, which is activated from a button on the dashboard, makes it possible to stop the tractor and restart by acting only on the brake pedal without using the clutch.
EasyDrive® electro-hydraulic reverser.
EasyDrive® electro-hydraulic reverser
Total control.
Optionally, the transmission can be equipped with the exclusive EasyDrive® electro-hydraulic reverser (standard on AI-Tractor).
The practical lever, on the left of the steering wheel, allows the operator to reverse the driving direction without using the clutch pedal and without lifting the hands from the steering wheel, while always keeping the vehicle control at all times.
Lift and hydraulics.
Absolute comfort.
The driving position is comprised of a platform suspended on a silent-block to reduce vibrations and noise.
The controls are set up ergonomically and in a way that offers easy operation, and from the operator’s seat there is a full unobstructed view of both machine and tool.
Maximum protection!
'Compact Pro' cab
Low profile and certification Cat. 4
The low chassis with height off the ground of only 176 cm makes use under the foliage, in pergola vineyards, canopy plantations and greenhouses extremely easy.
Pressurised and homologated in Cat. 4, isolates the operator from harmful inhalations during treatments with phytosanitary agents, making the work environment healthy and safe.
Exclusive optional devices.
Self Cleaning System™
Self Cleaning System™
The SCS™ keeps the radiator and intake grilles of the engine bonnet constantly clean from dust and debris raised during work, avoiding dangerous overheating.
Front bumper
Robust steel accessory that combines style and functionality by protecting the bonnet and radiator grille from impact.
In the configuration with front lift, it integrates the linkage of third point tie rod.
Front ballasts
Ballast weighing a total of 150 kg, designed for mounting on both sides of the bonnet so as not to increase the size of the tractor.
Not compatible with the front lift.
Front lift
Front lift equipped with quick-couplings cat. 1, front bumper and four hydraulic outlets.
It is essential for combined equipment applications.
Lifting capacity: 800 kg
Not compatible with the front ballasts.
