Draco K90
Super low professional tractor with differentiated wheels, 75 hp and 3800 cc (Stage V). Short wheelbase and ideal weight/power ratio.
The Draco K90 RS is a compact tractor equipped with a vigorous drive torque ideal for working in greenhouses, orchards and vineyards, even on slopes.
The new, low profile, pressurised and Category 4 approved “Compact Pro” cab (optional) ensures full operator protection.
SDT | Steering wheels
The oversized rear wheels, available in 20 or 24”, ensure high lifting capacity (2700 kg) and traction on any type of ground.
The OS-Frame and the steering acting on the front wheels ensure stability and adherence in any operating condition, even on slopes.
The standard manoeuvring brakes further reduce the turning radius for more agility between the rows.
The Draco K90 range is also available in the Dualsteer® version.
Technical Data
Draco K90 - RS
| Type | Differentiated wheels and short wheelbase with driving position with platform suspended on silent block |
|---|---|
| Chassis | Steering wheels |
| Driving position | Monodirectional |
| Transmission | 16 + 16 |
| Synchronized reverser | Yes |
| Electro-hydraulic power shuttle EasyDrive® | Optional |
| Drive | 4WD with front-wheel drive disengagement |
| Hydraulic system | Dual circuit with independent pumps |
| Heat exchanger | Yes |
| Joystick | Optional. Proportional electronic control of lifts and control valves, potentiometer for adjusting the hydraulic flow rate |
| Rear lifting capacity (kg) | 2700 (at the ball joint) |
| Front lift | Optional, complete with front bumper and four front hydraulic outlets |
| PTO rotation speed (rpm) | 540 / 540E (optional: 540 / 1000) |
| PTO engagement control | Electro-hydraulic |
| Service brakes | Multi disc in oil bath with hydrostatic control, acting on four wheels. Independent manoeuvring brakes acting on rear wheels |
| Cabin | Optional: 'Compact Pro' low-profile, pressurised and homologated Cat. 4, with heating and air-conditioning system |
Tyres: 420/65 R24 – 320/70 R24
Engine speed: 2400 rpm
Clean power.
The K90 range is equipped with a 3.8 litre-4-cylinder Kubota engine – fully compliant with the Stage V emissions regulations –which develops 75 hp and a vigorous torque of 305.4 Nm @1500 rpm.
The latest-generation Common Rail engine ensures a precise injection control, a more efficient combustion, improved performance and less fuel consumption.
Transmission.
EasyDrive® electro-hydraulic reverser.
EasyDrive® electro-hydraulic reverser
Total control.
Optionally, the transmission can be equipped with the exclusive EasyDrive® electro-hydraulic reverser (standard on AI-Tractor).
The practical lever, on the left of the steering wheel, allows the operator to reverse the driving direction without using the clutch pedal and without lifting the hands from the steering wheel, while always keeping the vehicle control at all times.
Maximum protection!
'Compact Pro' cab
Low profile and certification Cat. 4
The low chassis with height off the ground of only 176 cm makes use under the foliage, in pergola vineyards, canopy plantations and greenhouses extremely easy.
Pressurised and homologated in Cat. 4, isolates the operator from harmful inhalations during treatments with phytosanitary agents, making the work environment healthy and safe.
Functional design.
The Draco K90 range features an aggressive design yet elegant and functional, characterised by a muscular line which nevertheless provides the driver optimal visibility.
In addition to the four optical units on the front bumpers, two LED headlights above the bonnet grille increase the lit area to facilitate work at night or in poorly lit environments.
Additional options.
Front bumper
Robust steel accessory that combines style and functionality by protecting the bonnet and radiator grille from impact.
In the configuration with front lift, it integrates the linkage of third point tie rod.
Front ballasts
Ballast weighing a total of 150 kg, designed for mounting on both sides of the bonnet so as not to increase the size of the tractor.
Not compatible with the front lift.
Front lift
Front lift equipped with front protection and four hydraulic outlets, essential for combined equipment applications.
Lifting capacity: 800 kg
Not compatible with the front ballasts.
